Ctrlk

Film India Jab — Tak Hai Jaan Dubbing Indonesia

Samar dan Aisha kemudian jatuh cinta, namun kehidupan mereka masih memiliki banyak tantangan. Mereka harus menghadapi kesulitan dan pengorbanan untuk mempertahankan cinta mereka.

Bagi penggemar film India di Indonesia, “Film India Jab Tak Hai Jaan Dubbing Indonesia” adalah sebuah tontonan yang wajib dilihat. Film ini dapat memberikan pengalaman menonton yang sangat berkesan dan mengharukan. Jadi, tunggu apa lagi? Saksikan “Film India Jab Tak Hai Jaan Dubbing Indonesia” sekarang juga! Film India Jab Tak Hai Jaan Dubbing Indonesia

Bagi penggemar film India di Indonesia, kini ada kesempatan untuk menikmati film ini dengan dubbing bahasa Indonesia. “Film India Jab Tak Hai Jaan Dubbing Indonesia” memungkinkan penonton Indonesia untuk menikmati film ini dengan lebih mudah dan nyaman. Samar dan Aisha kemudian jatuh cinta, namun kehidupan

“Jab Tak Hai Jaan” mengisahkan tentang Samar (diperankan oleh Shah Rukh Khan), seorang ilmuwan yang bekerja di CERN, Swiss. Samar memiliki kehidupan yang bahagia dengan pacarnya, Naina (diperankan oleh Katrina Kaif). Namun, kehidupan mereka berubah ketika Samar terlibat dalam sebuah kecelakaan yang fatal. Film ini dapat memberikan pengalaman menonton yang sangat

 footprint_model: # types: "point", "circular", "two_circles", "line", "polygon"
    type: "polygon" #"circular" 
    radius: 0.38 # for type "circular"
    #line_start: [-0.3, 0.0] # for type "line"
    #line_end: [0.3, 0.0] # for type "line"
    #front_offset: 0.2 # for type "two_circles"
    #front_radius: 0.2 # for type "two_circles"
    #rear_offset: 0.2 # for type "two_circles"
    #rear_radius: 0.2 # for type "two_circles"
    vertices: [ [0.26, 0.26], [0.26, -0.26], [-0.26, -0.26], [-0.26,0.26] ]   # for type "polygon"

  inflation_dist: 0.0
  dynamic_obstacle_inflation_dist: 0.05
  include_costmap_obstacles: True
  costmap_obstacles_behind_robot_dist: 0.1
  obstacle_poses_affected: 25 #30
  costmap_converter_plugin: ""
  costmap_converter_spin_thread: True
  costmap_converter_rate: 5

footprint: [ [0.26, 0.26], [0.26, -0.26], [-0.26, -0.26], [-0.26,0.26] ]
# robot_radius: 0.38 #0.38 
# footprint_padding: 0.05 
map_type: voxel
#track_unknown_space: true

obstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8 #1.5 This must be higher than the z coordinate of the mounted lidar
    z_voxels: 1 
    obstacle_range: 10.0 #10.0
    raytrace_range: 15.0 #15.0
    observation_sources: laser_scan_sensor
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255 

    laser_scan_sensor: {data_type: LaserScan, topic: /scan, marking: true, clearing: true, min_obstacle_height: 0.00, max_obstacle_height: 3.00}
#point_cloud_sensor: {sensor_frame: lslidar_c16_frame, data_type: PointCloud2, topic: /lslidar_c16/lslidar_point_cloud, marking: true, clearing: true}
    
lowbstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8
    z_voxels: 1
    obstacle_range: 3.5 #if beyond this threshold, then will not mark as obstacle
    raytrace_range: 5.0 #5.0 Lower this value to detect nearer obstacles with better accuracy
    observation_sources: obs_cloud mock_scan #butt_scan1 butt_scan2
    publish_voxel_map: true
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255

    obs_cloud:
        data_type: PointCloud2
        topic: /obstacles_cloud
        marking: true
        clearing: true
        min_obstacle_height: 0.01
        max_obstacle_height: 0.99
    mock_scan:
        data_type: LaserScan
        topic: /obstacles_scan
        marking: false
        clearing: true 
        min_obstacle_height: 0.00
        max_obstacle_height: 1.00
        inf_is_valid: true

inflation_layer:
    enabled: true
    cost_scaling_factor: 6.0 #added in by John
    inflation_radius: 0.39 #0.45 #Minimum value: 0.379
    
dynamic_obstacle_layer:
    enabled: false
    map_tolerance: 0.2
    footprint_radius: 0.5
    range: 2.0

  plugins:
    - {name: static_layer, type: "costmap_2d::StaticLayer"}
    - {name: obstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: lowbstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: dynamic_obstacle_layer, type: "dynamic_obstacle_layer::DynamicLayer"} # Uncomment to apply dynamic_obstacle_layer
    - {name: inflation_layer, type: "costmap_2d::InflationLayer"}

  plugins:
    - {name: obstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: lowbstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: inflation_layer, type: "costmap_2d::InflationLayer"}
    # - {name: range_sensor_layer, type: "range_sensor_layer::RangeSensorLayer"}

obstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8 #1.5 This must be higher than the z coordinate of the mounted lidar
    z_voxels: 1 
    obstacle_range: 10.0 #10.0
    raytrace_range: 15.0 #15.0
    observation_sources: laser_scan_sensor
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255 

    laser_scan_sensor: {data_type: LaserScan, topic: /scan, marking: true, clearing: true, min_obstacle_height: 0.00, max_obstacle_height: 3.00}
    #point_cloud_sensor: {sensor_frame: lslidar_c16_frame, data_type: PointCloud2, topic: /lslidar_c16/lslidar_point_cloud, marking: true, clearing: true}

lowbstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8
    z_voxels: 1
    obstacle_range: 3.5 #if beyond this threshold, then will not mark as obstacle
    raytrace_range: 5.0 #5.0 Lower this value to detect nearer obstacles with better accuracy
    observation_sources: obs_cloud mock_scan #butt_scan1 butt_scan2
    publish_voxel_map: true
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255

    obs_cloud:
        data_type: PointCloud2
        topic: /obstacles_cloud
        marking: true
        clearing: true
        min_obstacle_height: 0.01
        max_obstacle_height: 0.99
    mock_scan:
        data_type: LaserScan
        topic: /obstacles_scan
        marking: false
        clearing: true 
        min_obstacle_height: 0.00
        max_obstacle_height: 1.00
        inf_is_valid: true